Monday, August 15, 2011

Webley Revolver

Introduction
The Webley Revolver (also known as the Webley Break-Top Revolver or the Webley Self-Extracting Revolver) was a standard issue pistol for the armed forces of the United Kingdom, British Empire, and the Commonwealths between 1887 and 1963.
The Webley is a top-break revolver with automatic extraction – meaning that when the revolver is broken open for reloading, the extractor ejects the spent cartridge casings. The Mk I was adopted in 1887, while the Mk IV was used during the Boer War of 1899-1902. Perhaps the best known model is the Mk VI, which was introduced in 1915.
The Webley fires a rather large .455 Webley cartridge, making it among the most powerful top-break revolvers ever produced. Although the .455 caliber Webley is no longer used by any military, the .38/200 Webley Mk IV is still used as a police sidearm in several countries.

Design
The British company Webley & Son (Webley & Scott since 1897) have produced several different revolvers from the mid-1800’s to the late 1900’s. Some of the earlier models, like the Webley Green army model 1879 or the Webley-Pryse model, were first made during the 1870’s. However, the best known models are a range of military revolvers which were in service during two World Wars and several colonial conflicts.
All Webley top-break revolvers had a two-piece frame, which breaks down at the forward low end for ejection and reloading. The ejector was automatically activated when the frame was broken open, which simultaneously ejected the spent cartridges from the cylinder. Then the new cartridges were inserted by hand or with a speed loader. In case of the revolvers being rechambered for .45 ACP ammunition, half-moon clips were used to load the gun (two clips, three rounds each). All Webley’s were either double action or double action only, with a distinguishable shape of the barrel and frame lock, with the lock lever on the left side of the frame, and a v-shaped lock spring on the right side.

History
In 1887, the British Army was trying to replace the Enfield Mk I and Mk II revolvers. Webley & Scott, which was already a well known manufacturer of good quality guns and had sold many pistols commercially to both military and civilian’s, made the .455 caliber Webley Self-Extracting Revolver for this purpose. The military was greatly impressed (it was seen as a vast improvement over the Enfield, which did not have a practical extraction system), and was adopted on November 8, 1887 as the “Pistol, Webley, Mk I”. The contract which followed called for 10,000 Webley revolvers at the price of £3/1/1 each, and at least 2,000 pistols to be supplied within eight months. These pistols were chambered for the .455 British Service cartridge, which launched a heavy 18 gram lead bullet at the relatively slow muzzle velocity of 600 feet per second. Later a smokeless version of this cartridge was adopted, but the gain in velocity was negligible.
The Webley Mk I
Over the course of time, the Webley Revolver went through many changes, which finally ended with the Mk VI, produced between 1915 and 1923. The large .455 caliber revolvers were retired in 1947, but the Mk IV .38/200 remained in service until 1963. Several commercial versions were sold to civilians, and some similar designs (such as the Webley-Government and Webley-Wilkinson) which were not officially adopted for service, were purchased privately by military officers.
The Webley Mk VI
Webley Mk VI cylinder
An opened Webley
Webley Mk IV .38/200 Service Revolver
The Webley Mk IV .38/200
After World War I, the British Military decided that a .455 caliber pistol and cartridge was too large for a modern military. After many tests and trials, it was decided that a .38 caliber pistol with a 200 grain bullet (0.457 oz) was just as effective as a .455 caliber pistol.  Webley & Scott immediately made the .38/200 caliber Webley Mk IV revolver (not to be confused with the regular Webley Mk IV revolver), which was almost identical in appearance to the Webley Mk VI. Much to Webley & Scott’s surprise, the British government took the design to the Royal Small Arms Factory at Enfield Lock, and produced a revolver which was very similar externally to the .38/200 Webley Mk IV, but internally different enough so that no parts could be interchangeable between the two. This Enfield pistol was accepted into the military under the designation of “Revolver, No.2 Mk I”, and adopted in 1932. This was followed in 1938 by the Mk I*, which featured a spurless hammer and only was double action. Finally, in 1942, the Mk I** was introduced, which was a simplified version for wartime production.
Webley & Scott sued the British government over this incident, claiming £2250 as the ‘costs involved in research and design’ of the revolver. RSAF Enfield firmly stated that the Enfield No. 2 Mk I was designed by Captain Boys (the Assistant Superintendant of Design, who designed the Boys Anti-Tank Rifle) with the assistance of Webley & Scott. Webley & Scott’s claim was denied, but the Royal Commission on Awards to Inventors eventually awarded Webley & Scott £1250 for their work.
Interestingly enough, RSAF Enfield proved to be unable to manufacture enough revolvers during World War II, and as a result the Webley Mk IV was adopted as the standard sidearm for the British Army.

Operational History
Boer War
The Webley Mk IV (.455 Webley caliber), which was introduced in 1899, soon became known as the “Boer War Model”, since large numbers of officers and non-com’s purchased them on their way to fight. In this war, the Webley served alongside a number of other pistols, including the Mauser C96 “Broomhandle”, early Beaumont-Adam’s cartridge revolvers, and several other top-break revolvers.

World War I
The Webley Mk V (adopted December 9, 1913) was the standard issue pistol at the outbreak of World War I, but more Mk IV’s were in service then because the order for 20,000 Mk V’s had not been completed before the outbreak of War.
On May 24, 1915, the Webley Mk VI was adopted as the standard sidearm for British and Commonwealth troops, and remained so for the duration of the war. It was issued to officers, airmen, naval crews, boarding parties, trench raiders, machine-gun teams, and tank crews – everyone except for the standard infantryman. The Mk VI proved to be a rather reliable and resilient weapon, and was well suited for the conditions of trench warfare. Several accessories were developed for the Mk VI, including a bayonet (which was made from a converted French Gras bayonet), a speedloader, and a stock (so that it could be used as a carbine).

World War II
During World War II, the official service pistol was the Enfield No. 2 Mk I .38/200 caliber revolver. Due to a critical shortage of handguns, several other weapons were adopted (at first only practically, late officially). For this reason, both the .38/200 Webley Mk IV and Webley Mk VI (.455 caliber) were issued to personnel during World War II.
The Webley Mk VI
Post-War
The .38/200 Webley Mk IV and .455 Webley Mk VI were still issued to British and Commonwealth forces after World War II – extensive stockpiles of revolvers were in military stores. There was a critical lack of ammunition for the type, however, which was what kept Enfield’s and Webley’s in use for so long – they were not wearing out due to lack of use.
Eventually, the .38/200 Mk IV was replaced by the Browning Hi-Power, this being complete in 1963, after it saw use in Korea, the Suez Crisis, the Malayan Emergency, and the Rhodesian Bush War.

Police Use
The Hong Kong Police and the Royal Singaporean Police were issued Webley Mk III and .38/200 Webley Mk IV revolvers from the 1930’s onwards. Singaporean Webley’s were equipped with a safety catch, which was not on the original design. These countries Webley’s were gradually retired during the 1970’s as they came in for repair, and were replaced with the Smith & Wesson Model 10 .38 revolver. The London Metropolitan Police and many other colonial police units are also known to have used Webley’s until just after WWII.
The Ordnance Factory Board of Inida still manufactures .380 Revolver Mk IIz cartridges, as well as a .32 caliber revolver with a 2-inch barrel that is clearly based on the .38/200 Webley Mk IV service pistol, thus the legacy is still continued today.
A box of WWII vintage .380in Mk IIz cartridges
.455 caliber Webley ammunition

Specifications
Weight: 2.4lb’s
Length: 11.25in
Caliber: .455
Cartridge: .455 Webley Mk II
Action: Double Action Revolver
Feed System: 6 round cylinder
Muzzle Velocity: 620 feet per second
Effective Range: 50 yards
Sights: Fixed front blade and a rear notch


Sources:
www.justguns.com
www.wikipedia.org
www.world.guns.ru

Monday, July 18, 2011

Lebel Model 1886

Lebel Model 1886 Rifle

Introduction
The Lebel Model 1886 rifle (in French, Fusil Modele 1886 dit “Fusil Lebel”), or the Fusil Mle 1886 M93 (after a bolt modification added in 1893), is an 8mm bolt-action infantry rifle that entered service with the French Army in April of 1887. It is a repeating rifle which is capable of holding eight rounds in its tube magazine, plus another round in the transporter and another in the chamber. The Lebel has the distinction of being the first military rifle to make use of smokeless powder ammunition. It also was the first to introduce the ‘boat-tail’ bullet as standard ammunition in 1901. The rifle has an oversized bolt with front locking lugs, and a massive receiver. It is a durable design, and capable of effective long-range performance. Despite its obsolete features, such as a tube magazine, and the sharply tapered case of 8mm ammunition, it still remained as the standard French infantry weapon during all of World War I. Altogether, 2,880,000 Lebel’s were produced by three French manufacturers between 1887 and 1920.

Operation, Features, and Accessories
The Lebel Model 1886 has a turn-bolt action with a two-piece bolt that has dual opposed front locking lugs. In operation, the bolt is turned up into the vertical until the two locking lugs are released from the receiver. A mechanical lift introduces a new cartridge in line with the chamber, and the closing of the bolt moves it into the firing chamber, while another cartridge is introduced onto the lift mechanism via the magazine spring.
Lebel Model 1886 Breech
The Lebel features a two-piece wood stock, and has a spring-loaded tube magazine in the fore end. Aiming at intermediate distances is done with a ramp sight, which graduates between 400 and 800 meters (1312-2624.5 feet). When brought up, the ladder rear sight is adjustable from 850-2400 meters (2788.75-7874 feet). Flipping forward, it reveals the more commonly used sight, which goes up to 400 meters (1312 feet).
The Lebel has no safety. The tube magazine is found under the barrel, and holds eight cartridges, charged rearwards via a pressure spring. Another cartridge can be held in the transporter, and another in the chamber, giving the Lebel a total capacity of 10 rounds. The rifle features a magazine cutoff on the right side of the receiver, and when activated it prevents the magazine from feeding cartridges.
The Mle 1886 was first developed at MAC (Manufacture d'armes de Châtellerault), and was also manufactured at State MAS and MAT until 1920. A private concern, Manufacture d’Armes de Paris also contributed smaller parts during World War I. The number manufactured until 1920 numbers some 2,880,000. The rifle was a sturdy and accurate weapon, and was the basic French infantry rifle during WWI. It remained in partial service throughout 1940, though it was outclassed in many cases.
An add-on to the Lebel Model 1886 was a long needle-like epee bayonet, the Épée-Baïonnette Modèle 1886. With a v-shaped cross section, this weapon was optimized for thrusting, and designed to penetrate thick clothing and leather. It was dubbed “Rosalie” by French soldiers during WWI. It proved to be very effective for both stabbing and thrusting, and was frequently cut down by individuals and ordnance sections into a stiletto-type thrusting knife for use in trench warfare during WWI.

Origins and Development
The Lebel was developed as a direct result of the invention of smokeless gunpowder. French chemist Paul Vielle’s nitrocellulose-based Poudre B (Powder B) was three times more powerful than the same amount of black powder, and left very little combustion residues after firing. Also, Switzerlands Major Eduard Rubin invented a copper jacketed, lead core, small bore bullet in 1883, which could be fired at tremendous velocities without melting inside of a rifles barrel.
Shortly after these developments, the French War Minister, General Boulanger, requested in January of 1886 for an urgent application of these designs into a new infantry rifle. He appointed General Tramond to take charge of the project within less than a year. It was decided to redesign the Gras cartridge case into a new 8mm case, and this transformation was carried out by Captain Desaleux. Most of the new mechanical details were designed by Controllers Albert Close and Louis Verdin at the Chatellerault arsenal. The 8mm full metal jacket flat nosed projectile (Balle M) was responsible for the formulation and construction of the new rifle. Colonel Lebel protested during his lifetime that Colonel Gras had more of the responsibility for creating the rifle, but despite his efforts, Lebel’s name went to the Balle M as Balle Lebel, and eventually stuck to the entire weapon system.
The Lebel Model 1886 followed the bolt action 11mm Mle 1874 Gras and Mle 1878 French Naval Kropatschek rifle designed by the Austrian Alfred von Kropatschek. It shared the latters tubeular magazine in the fore end. Two other rifles had followed these designs, still using the 11mm Gras cartridge – the Mle 1884 and Mle 1885. Over 20,000 Mle 1884’s had been issued when it was decided to adopt the Lebel.
In 1893, an improved version of the Lebel, designated Fusil Mle 1886 M (modifie) 93, was produced. The main changes included the bolt head being modified for a better venting of the gasses that could escape accidentally from a ruptured cartridge head, while the fixation of the rear sight onto the barrel was improved. The firing pin and rear knob were not improved, since they had already been modified earlier in 1888.
The Lebel Model 1886 was manufactured by three government arsenals: Chatellerault, St-Etienne and Tulle. The Tulle arsenal continued producing Lebel’s during World War I, and closed the last assembly line in May of 1920. They did continue to re-barrel and repair Lebel’s until the late 1930’s.
Between 1935 and 1940, a carbine-length version was issued, designated Mle 1886 M93-R35. It was designed mainly for use by mounted troops and support personnel. This was built in large numbers at Tulle, beginning in 1935. It was made up entirely of Lebel parts, with the exception of the shorter barrel. However, the magazine had to be shortened due to a shorter fore end, and the resulting rifle only held three rounds in the magazine, one in the transporter, and one in the chamber.
The total number of Lebel’s built between 1887 and 1920 exceeds 2.8 million. Chatellerault alone manufactured 906,760. The machinery used to produce Lebel’s was purchased from the British firm of Greenwood and Batley, while other specialized machinery was purchased from the United States in 1886 to accelerate and make standard mass production. All Lebel parts are fully interchangeable regardless of the place and time of manufacture. All of the key parts have the same serial number, with the exception of the many Lebel’s that underwent arsenal repairs or rebuildings during World War I and into the 1930’s.
The Lebel Model 1886 proved to be a reliable and sturdy rifle, and easily serviceable. However, it became outdated very quickly by the leaps and bounds in rifle and ammunition design. As early as 1888, the Germans had introduced a turn-bolt magazine rifle with a spring-loaded box magazine – the Gewehr 88 or “Commission” rifle. It was designed around the first rimless military cartridges using smokeless powder. It was followed ten years later by the Gewehr 98.
In response to being left behind in military rifle designs, the French decided to replace the Lebel and its cartridge with more efficient and modern designs. While the Berthier rifle was introduced in 1907 as a stop-gap, the French secretly planned to get far ahead in technology by introducing a semi-automatic rifle. Thus came the Meunier rifle, or Fusil A6, which utilized a 7x59mm rimless cartridge. It was adopted in 1912, but its manufacture, scheduled to begin in 1913, was postponed because of rumors of war with Germany. To re-equip the entire army with these rifles would have required a change in ammunition type, and at least 500,000 rifles. Instead, during World War I, the French chose an easier solution of adopting a gas-operated semi-automatic rifle which used Lebel parts – the Fusil Model 1917 RSC, which was of 8mm caliber. It was manufactured in large numbers during 1918, and issued to select soldiers of frontline infantry regiments. However, it required constant attention in the muddy trenches, and was criticized by the infantry as being too heavy, too long, and too difficult to maintain. It also needed a special five-round clip for operation. In the end, the Lebel remained in service with the French Army until 1940.

8mm Lebel Cartridge
Balle D 8mm Lebel ammunition
The Lebel 8x50R smokeless powder cartridge combined with the longer and flatter trajectory of the advances in infantry armament made a deadly combination. A soldier with a Lebel could outrange anyone armed with a black powder, large-caliber rifle. At longer ranges, he could be virtually invisible with his smokeless ammunition. Also, more cartridges could be carried for the same standard weight as those with black-powder, large caliber ammunition. The early 15 gram jacketed, flat-nosed, lead-cored Balle M’s had an extreme range of 3,500 yards, and a muzzle velocity of 2,000 feet per second. The effective range was about 438 yards.
A new 12.8 gram solid brass spitzer (pointed, as opposed to flat-nose), boat-tailed bullet called Balle D was adopted for the Lebel in 1898, and was in generalized service after 1901. This improved ballistic trajectory required a replacement of the rear sights on the Lebel Model 1886. Also, the spring-loaded follower inside of the magazine was redesigned in 1898 for use with the Balle D. The Balle D was the first boat-tailed spitzer bullet adopted by any infantry force in the world. With an even flatter trajectory and an extreme range of 4,000 yards, its maximum effective wounding distance was 1,800 yards (fired at massed targets). However, the realistic effective range of the Lebel was increased to about 457 yards with open sights.
However, the Balle D did introduce new problems – accidental ignition inside of a tubular magazine. To work around this, a circular groove was formed on each case head, around the primer pocket, so as to receive the tip of the cartridge that followed. Also, the Berdan primer on each cartridge was protected by a thick convex primer cover, which, in effect, gave a double primer cup. Because of this standard protection, French military issue Balle D and Balle N ammunition is safe inside of the magazine.
The last type of military issue Lebel ammunition was the Cartouche Model 1932N, which used steel and cupro-nickel jacketed spitzer, boat-tail bullet. This ammunition was only suitable for Lebel and Berthier rifles marked N on the top of the receiver and barrel. This ammunition was originally designed to increase the range of the Hotchkiss machine gun, and production was ended in France during the late 1960’s.
Lebel ammunition was powerful for its time. It ranked slightly higher in muzzle energy than British .303in ammunition, but slightly lower than the German 7.92x57mm Mauser cartridge.

Operational History
After the Lebel’s adoption into the French army, many other nations also switched over to small-bore rifles using smokeless ammunition. Germany and Austria adopted their new infantry rifles in 1888, Italy and Russia in 1891, and the United States in 1892. In 1895, the British altered their .303in Lee-Metford to use smokeless powder ammunition, which resulted their .303in Lee-Enfield.
In the early 20th century, the Lebel was sold in French overseas colonies for the protection of civilians and/or hunting. Brand new military-issue 1886 and 1893 Lebel rifles could be purchased by authorized civilians, and were in catalogues of French mail-order firm Manufrance until 1939. A sporting version called the “Lebel-Africain” was offered by Manufrance during the pre-WWII years. It featured a shorter barrel, a turned-down bolt handle, and a slimmer, better finished stock. But when compared to the Mauser and Mannlicher-Schoenauer hunting rifles of the time, it was not as competitive as a hunting weapon.

World War I
During World War I, when the Lebel was used in combat against the Mauser and other more modern rifle designs, its main weakness was its slow-reloading magazine. Also the upper barrel section was unprotected, which could result in burned fingers during rapid firing. Finally, the sights were rather small, which left much to be desired for a rapid-fire emergency situation. Despite these handicaps, the Lebel was still preferred over Berthier’s.
During WWI, the Lebel was the standard infantry rifle, while the Berthier rifle, a lengthened version of the Berthier carbine, was issued to colonial troops, allied contingents within the French army, and the Foreign Legion. Berthier carbines had been issued to cavalry, artillery, machine gun, and engineering troops before the war began.
Both Lebel’s and Berthier’s could be equipped with a removable VB (Viven-Bessieres) rifle grenade launcher. APX Model 1916 and Model 1917 telescopic sights were used with Lebel’s during the later part of World War I, and scoped Lebel’s and Berthier’s were also used during the outbreak of World War II, but they were no longer competitive as sniper rifles in 1940.
The Foreign Legion, after being equipped with Berthier’s during WWI, insisted on being re-equipped with Lebel’s after the end of the war. The difference between the Lebel and Berthier was the Lebel’s stronger construction, better accuracy, and larger magazine.

Post-World War I
Several factors during the late 1920’s and 1930’s, including the depressed economy and reduced war budget, the French Army neglected the modernization of infantry weapons after World War I ended. It took seven years after the official 1929 swap to rimless 7.5mm ammunition to introduce the 7.5x54mm MAS-36 rifle into the French army, and even then its manufacture was not enough to equip all French troops. A thoroughly tested semi-automatic rifle, the MAS 1938/39, was ready to be produced just before World War II broke out, but it did not appear in large numbers until ten years after the fact as the MAS-49. Finally, the standard heavy machine-gun was the Hotchkiss 1914, which was leftover from World War I and used obsolete Lebel ammunition. The failure of the French to modernize their infantry weapons is also shown in the fact that many French second-line troops still used Lebel’s, many of which were modified to carbines, during World War II. The neglect to modernize infantry armament after World War I was yet another contributing factor to the French defeat in June, 1940.

Specifications
Weight: 9.22 lbs empty; 9.7 lbs with 10 rounds
Length: 4.3 feet (51.34 inches)
Barrel Length: 2.6 feet (31.42 inches)
Caliber: 8mm
Cartridge: 8mm Lebel

Rifling: 4 grooves with a right to left twist
Action: Bolt Action
Feed System: 8 round tube magazine
Muzzle Velocity: 2,000 to 2,300 feet per second
Effective Range: 438 yards, individual targets
Maximum Effective Range: 1,644 yards, volley fire
Sights: Iron Sights


Sources:
www.guns.wikia.com
www.militaryfactory.com
www.wikipedia.org

Monday, June 27, 2011

Curtiss F11C/BF2C Goshawk

XF11C-2 Test Flight, November 4, 1932

Introduction
The Curtiss F11C Goshawk was a 1930’s biplane that served with the United States Navy. Though it only saw limited successes, it was part of a long line of Curtiss ‘Hawk’ aircraft, built by the Curtiss Aeroplane and Motor Company for the United States military.

Development
In April of 1932, when the Curtiss Company was planning the Model 35B, the United States Navy contracted with Curtiss for an improved version of the Model 34C, or F6C, as the F11C. Several changes were made, including the use of the 600hp Wright R-1510-98 radial engine, single-leg cantilever main undercarriage units, and a slight increase in interplane gap, metal covered control surfaces (as opposed to fabric), and an armament of two 7.62mm Browning machine guns and a hardpoint under the fuselage for a 474lb bomb or a drop tank.
Curtiss designed the aircraft, designated by the company as the Model 64 ‘Goshawk’, while the USN designated it XF11C-1. The aircraft was made of fabric-covered metal framing, and had the wing cell structure of the YP-23, and was delivered in September of 1932.
Before ordering the XF11C-1, the USN had bought a company-owned Model 64A demonstrator, with a Wright R-1820-78 Cyclone, slightly longer main undercarriage legs, and wheels that had low pressure tires, a tailwheel instead of a tailskid, fabric-covered tail control surfaces, and provision for underwing racks for light bombs in addition to the fuselage hardpoint. Flight trials of this XF11C-2 showed a need for some minor changes, and it was regarded as the prototype for the F11C-2, twenty-eight of these being ordered as fighter-bombers (or as the Navy would have it, bomber-fighters) on October 18, 1932. Deliveries began the following February, and were completed in May of 1933.
From March 1934 onwards, the aircraft was revised with a semi-enclosed cockpit and several other modifications before it was designated BFC-2 (BF standing for Bomber-Fighter). The last aircraft in the XF11C-2 contract was converted into the XF11C-3, with the more powerful Wright R-1820-80 engine, and a hand-cranked retractable landing gear.
XF11C-3 Test Flight

Operational History
The only USN units to operate the F11C were VF-1B and VB-6. VF-1B, the famous “High Hat Squadron” was assigned to the USS Saratoga. In March of 1934, when F11C’s were renamed BFC’s, they were renumbered as VB-2B, and subsequently as VB-3B, and used BFC-2’s until February of 1938. VB-6 never actually embarked on their carrier, the USS Enterprise, while using BFC aircraft.
The F11C produced several export versions, known as Hawk I, Hawk II, and Hawk III. The Hawk II, basically a modified XF11C-2, was fitted with a 710hp Wright R-1820F-3 Cyclone radial engine, and carried 94 gallons of fuel, while the Hawk I only carried 50 gallons. Both carried the same armament as the F11C-2. The Hawk II was exported in quantity to Turkey, the first customer who ordered 19 on August 30, 1932. Columbia ordered theirs in October of the same year, also receiving twenty-six versions with twin-floats. The Columbian’s used their Hawk II’s and float-equipped F11C-2’s in the Columbia-Peru War, 1932-33. Nine Hawk II’s were sold to Bolivia, three of which could change between wheels and floats. Four aircraft were sold to Chile, fifty-two to China, four to Cuba, two to Germany, and one to Norway. Twelve were also sold to Thailand, who also obtained a license and built fifty of them locally, designating them as Fighter Type 10.

Variants
XF11C-1 (Model 64): The first prototype, derived from the Curtiss F6C Hawk
XF11C-2 (Model 64A): The second prototype; later redesignated XBFC-2
F11C-2 (Model 64A): The production version; later redesignated BFC-2; 28 built.
XF11C-3 (Model 67): A single F11C-2 fitted with a retractable undercarriage, and using a 700hp Wright R-1820-80 radial.
BF2C-1 Goshawk (Model 67A): Production version of the XF11C-3; 27 built.
Hawk II (Model 65): Export version of the XF11C-2; 126 built, 32 as floatplanes. Exported to Bolivia, Chile, China, Columbia, Cuba, Germany, Norway, Thailand, and Turkey.
Hawk III: Export version of the BF2C-1 with a 770hp Wright R-1820-F53 radial; 137 built; exported to Argentina, China, Thailand, and Turkey.
Hawk IV (Model 79): Export version utilizing a 790hp Wright R-1820-F56 radial; one built.

Specifications
F11C-2/BFC-2
Length: 22ft 7in
Height: 9ft 8.65in
Wingspan: 31ft 6in
Wing Area: 262 sq. ft.
Empty Weight: 3,037lb
Maximum Weight: 4,132lb
Powerplant: 1x 700hp Wright R-1820-78 Cyclone air-cooled radial engine
Maximum Speed: 202mph
Range: 572 miles; 286 miles with maximum payload
Ceiling: 25,100ft
Armament: 2x 7.62mm M1919 Browning machine guns in forward fuselage
Stores: 1x 474lb bomb under fuselage or 2x 120lb bombs, one under each wing, or 1x 50 gallon drop tank under fuselage

Sources:
www.avaiastar.org
www.rtaf.mi.th
www.warbirdsresourcegroup.org
www.wikipedia.org

Monday, June 20, 2011

Chiang Kai-shek

Introduction
Chiang Kai-shek was a political and military leader of China during the 20th Century. He is also known as Jiǎng Jièshí or Jiǎng Zhōngzhèng in Mandarin.
Chiang (since this name is Asian, the family name is said first) was an influential part of the Kuomintang, the Chinese Nationalist Party, and was a very close ally of Sun Yat-sen. He was the commandant of the KMT’s Whampoa Military Academy, and became the leader of the Kuomintang in 1925. He led the Northern Expedition, and eventually became China’s leader. He led China through the Second Sino-Japanese War, which was integrated into World War II and became the China-Burma-India Theater.
After the war, Chiang lost control of China, and lived in exile in Taiwan. Today, there are still mixed feelings towards him – some viewing him with disdain, while others view him as a hero. During the presidency of Chen Shui-bian (2000-2008), hundreds of his statues were taken down all over Taiwan.

Early Life
Chiang Kai-shek was born on October 31, 1887, to a middle-class family living in Xikou, in the Zhejiang Province. He attended a private school at the age of six, and learned the Chinese classics. Chiang’s grandfather died when he was eight, and his father died when he was 9, leaving the family in poverty. Because of this, he adored his mother all the more.
In China, fatherless families had a harder time fitting in to society, and often had people take advantage of them. Chiang often had to tolerate anger and suffering, but his enthusiasm for learning was kindled. He learned many of the Chinese classics between the ages of ten and sixteen. When he was seventeen, he attended a modern school, and then entered the school at Ningbo to learn current events and western law. While there, he became interested in the revolutionary acts of one Sun Yat-sen. This interest would change his life forever.
Since the fighting between warlords in China left the country destabilized and in much debt, Chiang decided on a military career. He started at the Baoding Military Academy in 1906, and in 1907 he went to the Tokyo Shibu Gakko, an Imperial Japanese Army Academy Preparatory School. During this time, he became a supporter of Sun Yat-sen, the leader of the Tongmenghui (the precursor of the Kuomintang).
Chiang in 1907, Baoding Military Academy
In 1911, Chiang returned to China and joined in the Wuhan Uprising to overthrow the Qing dynasty, leading the regiment that captured Shanghai. Several sources state that his first personal act of violence happened about this time, when he either instigated or performed an assassination of a member of the Revolutionary Alliance who opposed Sun Yat-sen and Chen Qimei. Chiang returned to Japan after the counter-revolution.
In 1917, when Sun Yat-sen established the Kuomintang in Guangzhou, Chiang served as a military aide. Soon Sun Yat-sen was exiled into Shanghai until he retook Guangzhou with help from mercenaries in 1920. However, the governor of the Guangdong province, Chen Jiongming, came upon a disagreement with Sun, wanting to establish a federalist system in Guangdong. On June 16, 1923, Chen launched an attempted assassination of Sun Yat-sen by shelling his residence. Sun and his wife, Soong Ching-ling, had a narrow escape from machine-gun fire, and were rescued by gunboats commanded by Chiang Kai-shek. This earned Chiang Sun’s trust. Sun finally secured Guangzhou in early 1924, again with help from mercenaries from Yunnan.
In 1924, Sun Yat-sen and China traveled to the Soviet Union to learn military strategy. While there, Chiang met with Leon Trotsky and other Soviet leaders, but concluded that Communism was not good for China. Upon Chiang’s return, he was appointed as the commandant of the new Whampoa Military Academy at Guangzhou. After Sun Yat-sen died on March 12, 1925, Chiang’s became the leader of the KMT after a conflict with Wang Ching-wei.

Leadership of China
In 1926, Chiang launched the Northern Expedition, leading the KMT into Shanghai and Nanjing. He cooperated with the Communists, and received aid from Russia. However, in 1927, Chiang reversed Sun Yat-sen’s policy, and started to fight against the Chinese Communist Party, starting a civil war. On April 12, 1927, Chiang instigated the purging of thousands of suspected Communists and dissidents from Shanghai, and had them massacred. This happened all over China. There were 12,000 people killed in Shanghai alone. These killings drove most of the Communists into the countryside, where the Kuomintang was less powerful. Chiang eventually defeated the CCP, and forced them on the “Long March” to Shensi, in North-West China. By the end of 1927, he served as the head of the Kuomintang and became Generalissimo of all the Chinese Nationalist forces, and his power was virtually unlimited.
Chiang established the Nationalist Government in Nanjing. He carried out major financial reforms, improved the education system, and improved the roads and transportation system. In 1934, he established the New Life Movement, promoting the traditional Confucian values. This was to combat Communist ideology.
After the Japanese invaded Manchuria, Chiang resigned as the Chairman of the National Government, but returned shortly thereafter. He attempted to avoid an all-out war with Japan, but this was not a very popular policy. While attempting to destroy the Communists in 1932, the Japanese advanced on Shanghai and bombarded Nanjing. This disrupted his offensive against the Communists, who were led by Mao Zedong.
In December of 1936, Chiang flew to Xi’an to coordinate a major assault on the Chinese Communist Party’s forces which had retreated to Yan’an. However, his allied commander Zhang Xueliang, who had controlled Manchuria and lost it to the Japanese, disagreed with Chiang about fighting the Communists. On December 12, Zhang and several other collaborators kidnapped Chiang Kai-shek for two weeks to force him to make a “Second United Front” with the Communists against Japan, which Chiang had to accept. After Chiang’s release, Zhang Xueliang was placed under house arrest, and the other generals that assisted in the kidnapping were executed. Chiang kept his side of the agreement to ally with the Communists, but this treaty disintegrated in 1941 when some of Chiang’s troops clashed with CCP troops.
The Second Sino-Japanese War broke out in July of 1937, and in August of that year Chiang sent 600,000 of his best-trained and equipped men to defend Shanghai. They suffered over 200,000 casualties. Though it was a military defeat, Chiang showed the Japanese that they could not capture China, as they claimed, in three months. But still the Japanese pressed inland. In December, Nanjing fell, and Chiang was forced to move the government to Wuhan. When Wuhan fell, the government was moved to Chongqing. He moved his army to the hinterlands so as to bog down the Japanese in the Chinese interior.
Chiang Kai-shek, Soong May-ling (wife), Joseph Stilwell
After the attack on Pearl Harbor in 1941, the Sino-Japanese war merged into the greater conflict of World War II, and Chiang’s international prestige increased. China received financial aid from the United States. General Joseph Stilwell was sent over, and he became the head of the allied forces in the China-Burma-India Theater. Stilwell was very critical of Chiang, arguing that he was an inept leader and ignorant of the fundamentals of modern warfare. Stilwell was accused of being pro-Communist, and was recalled to the US in October of 1944.
Chiang Kai-shek with Franklin D Roosevelt and Winston Churchill in Cairo
During World War II, FDR privately made it clear that he did not want the French to retake French Indochina (modern-day Vietnam, Cambodia, and Laos). When Chiang was offered control of Indochina, Chiang refused. When the war ended, 200,000 Chinese troops under General Lu Han were sent to Indo-China to accept the surrender of the Japanese there. They remained until 1946, when the French returned. The Chinese used the VNQDD, the Vietnamese branch of the KMT, to increase their influence in Indochina, and pressure their opposition. Chiang threatened war with France in response to the French maneuvering their forces against Ho Chi Minh, which forced the French to choose peace. In February of 1946, Chiang forced the French to surrender all of their concessions in China, and renounce the extraterritorial privileges in exchange for the Chinese withdrawing from northern Indochina and allowing the French to reoccupy. The French agreed, and Chiang withdrew his troops in March of 1946.
But Chiang still had a disagreement with the Communists. The United States encouraged peace talks between Chiang and Mao Zedong in Chongqing, but they gave very limited aid to the Nationalists throughout 1946 and 1948. An alleged infiltration of the US government by Chinese communists may have helped in the suspension of aid.
Chiang Kai-shek being inaugurated as the President of the Republic of China, 1947
While several political difficulties within the KMT went on, the Communists were pushing into China. In early December of 1949, the Communists laid siege to Chengdu, the last KMT-controlled city on the Chinese mainland. Chiang directed the defense from the Chengdu Military Academy. Before the Communists broke in, Chiang was evacuated to Taiwan, never to return.

In Exile
In Taiwan, Chiang established a dictatorship. He continued to promise to re-conquer China, and landed Chinese guerillas on the Chinese coast. He published his autobiography, Summing Up At Seventy, in 1957.
Chiang Kai-shek in Taiwan, 1966
Chiang’s international position was weakened in 1971 when the United Nations expelled his regime, and accepted the Communists as the government of China. Chiang Kai-shek died on April 5, 1971, in a hospital in Taiwan. A month of mourning was declared, and the Chinese composer Hwang Yau-tai wrote the Chiang Kai-shek Memorial Song. Mainland Chinese newspapers gave the brief headline, “Chiang Kai-shek Has Died”.
Chiang Kai-shek was succeeded as President by Vice President Yen Chia-kan, and as KMT party leader by his son, Chiang Ching-kuo, who retired Chiang Kai-shek’s title of Director General, and instead assumed the position of Chairman. Chiang Ching-kuo became the President after Yen’s term ended three years later.
Chiang Kai-shek's body entombed in Cihu

Sources:
www.library.thinkquest.org
www.spartacus.schoolnet.co.uk
www.wikipedia.org

Monday, June 13, 2011

Kawasaki Ki-10 "Perry"

Kawasaki Ki-10-I "Perry"

Introduction
The Kawasaki Ki-10 (or the Army Type 95 Fighter) was the best and last biplane fighter to serve in the Imperial Japanese Army. It was very maneuverable, and had a big influence on newer monoplane designs. It was built by the Kawasaki Kokuki Kogyo KK, and saw combat in Manchuria and China. The Allied code-name was “Perry”.

Design and Development
The Ki-10 was designed by Takeo Doi, who was the chief designer for Kawasaki. The design was made in response to a requirement issued by the IJA for a new fighter, which was to be equal in performance to that of the Hawker Fury and Boeing P-26 Peashooter. Kawasaki’s first design, an inverted gull-wing monoplane designated Ki-5, was rejected due to a lack of maneuverability. The IJA then ordered Kawasaki to design a high-performance biplane, leading to the design by Takeo Doi.
The Ki-10 was entered into a competition with the Nakajima Ki-11. Powered by a Kawasaki Ha-9-IIa and driving a two-bladed wooden propeller, the Nakajima design was faster. However, the Ki-10 won in maneuverability hands down, and it was accepted over the Ki-11.
The Ki-10 was a sesquiplane (wings of different lengths) design, the wings being braced by struts, and the ailerons only on the upper set of wings. The structure was all-metal and covered with fabric. The armament consisted of two 7.7mm Type 89 machine guns, which were synchronized to fire through the propeller. To increase the speed on the production aircraft, a three-bladed, metal propeller was used, along with flush-head rivets. Production of the Ki-10 began in 1935.
Several variants of the Ki-10 were made. The first production model was the Ki-10-I. Three hundred Ki-10-I’s were built between December 1935 and October 1937. In an attempt to clean up the Ki-10-I, a new version designated Ki-10-I Kai was produced from April till October 1936. This model had a new, low-drag, cantilever undercarriage installed. It also moved the radiator back to a new position between the undercarriage legs. The same engine was used, but the top speed was increased by 12.5mph.
The Ki-10-II was developed while the Ki-10-I was produced. It boasted a longer fuselage and larger wings, and was noticeably more stable. It was ordered into production as the Army Type 95 Model 2. 280 were built between June 1937 and December of 1938. Two Ki-10-II Kai’s were produced by converting two Ki-10-II’s to Ki-10-I Kai’s. They differed in the engine, the Ki-10-II Kai having the Kawasaki Ha-9-IIb, capable of short bursts of 950hp at 12,470ft.
The Ki-10-II Kai Prototype

The Ki-10-II Kai Prototype

Operational History
The Ki-10 was deployed in Formosa, Korea, Manchuria, and in the beginning campaigns of the Second Sino-Japanese War. An excellent dogfighter, it proved to be capable of taking on many aircraft employed in the Chinese Air Force. But by the time of the Nomonhan Incident with the Soviets (the Battles of Khalkhin Gol), it was largely obsolete.
At the beginning of World War II in the Pacific, the Ki-10 was moved back to training and second-line missions. It was returned to front-line services in January and February 1942, flying short-range patrol and reconnaissance missions in Japan and China. American Intelligence mistakenly believed that it was still in front-line service, and gave it the code-name “Perry”. However, the type was encountered only occasionally over China.


Variants

Ki-10: Prototype for the Imperial Japanese Army Air Force; 4 built in early 1935.
Ki-10-I: Army Fighter Type 95-1; initial production version, 300 built between December 1935 and October 1937.
Ki-10-II: Prototype of a modified Ki-10-I; increased in length; one built in May of 1936.
Ki-10-II: Army Fighter Type 95-2; an improved production version of the Ki-10-II prototype, 280 built between June 1937 and December 1938.
Ki-10-I KAI: Prototype Ki-10-I with modifications to the engine and radiator, one built in October of 1936.
Ki-10-II KAI: Prototype – a modification of the Ki-10-II with an 850hp Kawasaki Ha-9-IIb engine; two built in November of 1937.


Specifications
Ki-10-I
Length: 23ft 7.5in
Height: 9ft 10in
Wingspan: 31ft 4in
Wing Area: 215-277 sq. ft.
Empty Weight: 2,866lb
Loaded Weight: 3,638lb
Powerplant: 1x 850hp Kawasaki Ha-9-IIa 12-cylinder V liquid-cooled inline
Maximum Speed: 248.5 mph @ 9,845ft
Range: 684 miles
Ceiling 32,810ft
Armament: 2x 7.7mm Type 89 Machine Guns in engine cowling

Ki-10-II
Length: 24ft 9.25in
Height: 9ft 10in
Wingspan: 32ft 10.5in
Wing Area: 247-569 sq. ft.
Empty Weight: 2,998lb
Loaded Weight: 3,836lb
Powerplant: 1x 850hp Kawasaki Ha-9-IIa 12-cylinder V liquid-cooled inline
Maximum Speed: 248.5mph @ 9,845ft
Range: 684 miles
Ceiling: 37,730ft
Armament: 2x 7.7mm Type 89 Machine Guns in engine cowling

Sources:
www.aviastar.org
www.daveswarbirds.com
www.historyofwar.org
www.wikipedia.org

Tuesday, May 31, 2011

Mitsubishi A5M 'Claude'

The Mitsubishi A5M
Introduction
The Mitsubishi A5M was a Japanese carrier-based aircraft. The Imperial Japanese Navy’s official designation was Type 96 Carrier-Based Fighter. The A5M was the first monoplane shipboard fighter in the world, and was the direct ancestor of the famous Mitsubishi A6M Zero. The Allied code-name for the A5M was ‘Claude’.

Design and Development
In 1934, the IJN issued their 9-Shi specification for an advanced fighter with a maximum speed of 220mph at 10,000ft, ability to climb to 16,500ft in 6.5min, and excellent maneuverability. Both Mitsubishi and Nakajima produced designs. Mitsubishi’s submission was designed by the team led by Jiro Horikoshi, the man who later designed the A6M. The design was designated Ka-14 by Mitsubishi.
To save on weight, a fixed undercarriage was used, housed in streamlined fairings. The fuselage was of a tubular shape, and covered in flush-riveted aluminum skin, with a small cross-section. The tail section was conventional, with the applicable tail surfaces. The wings were low-fitted to the front of the aircraft, and had rounded wingtips. The first prototype had inverted gull type wings. The pilot sat well forward, just aft of the engine housing. It had an opened-cockpit, with a windscreen to the front and a raised fuselage-spine to the rear. Armament consisted of two 7.7mm Type 97 Machine Guns mounted in the fuselage.
The first prototype was powered by a Nakajima Kotobuki 5 radial engine, and flew on February 4, 1935. It far exceeded the requirements, reaching speeds of 279mph. The second prototype, which did not have the gulled wings and had other various changes for better maneuverability and reduced drag, was ordered into production as the A5M.
Since the Ka-14 gave excellent performance, the Imperial Japanese Army Air Force showed interest, and ordered a single prototype designated as the Ki-18. It was much faster than the current IJAAF fighter, the Kawasaki Ki-10, but was rejected because the Ki-10 was more maneuverable. The IJAAF then issued a specification for an advanced fighter to replace the Ki-10. Mitsubishi, busy with the A5M for the navy, gave a prototype with very few changes, designated as the Ki-33. However, it was defeated by Nakajima, who got the contract for the Ki-27.
A trainer version, the A5M4-K, was developed, and 103 produced. It had a two-seat cockpit, and was used for fighter training well after the A5M left front-line service.

Operational History
The Mitsubishi A5M entered service in 1937, and saw action during the Second Sino-Japanese War. The A5M participated in some of the first ever dogfights between monoplanes when it fought with Chinese Boeing P-26C Peashooters. The A5M was better than any aircraft that the Chinese could put into the air, except for the Polikarpov I-16, flown by Russian volunteers.
Mitsubishi continued to improve the design. A closed cockpit was tried, but it was disliked by pilots. The final variant put into production was the A5M4, which had provision for a ventral drop tank.
The A5M was very effective and damage tolerant. Its main duties in the Second Sino-Japanese War was escorting Mitsubishi G3M bombers in raids which almost destroyed the Chinese Nationalist Air Force, and saw many fierce battles. For example, on April 29, 1938, 27 A5M’s escorted 10 G3M’s on a raid, and were intercepted by 67 I-16’s. Both sides claim victory in the battle. The Chinese and Soviets claimed 11 A5M’s and 10 G3M’s destroyed; the Japanese only admit two of each lost, while claiming 40 I-16’s! A5M’s continued to see action into the 1940’s. The American Volunteer Group unofficially encountered a few, and one was shot down over Mingaladon Airfield, Burma, on January 29, 1942.
A5M’s saw a small amount of service after December 7, 1941 in Malaya and the East Indies. United States intelligence mistakenly believed that it was still the primary fighter of the IJN, but it really had been replaced by the A6M by that time. The last official combat action of the A5M was in the Battle of the Coral Sea, on May 7, 1942, when two A5M’s and four A6M’s unsuccessfully defended the light carrier Shoho against attacking US Navy Aircraft. Most A5M’s were put into training services after they were removed from front-line units. Some A5M’s were used for kamikaze attacks in the closing months of the war.
An A5M from the Akagi, 1938 or 1939

In all, A5M’s saw service on the Imperial Japanese Carriers Akagi, Hosho, Kaga, Ryujo, Shoho, Soryu, and Zuiho, and several land-based naval squadrons.

There were several pilots who became aces in the A5M, with Lieutenant Tetsuzo scoring fourteen kills to become the top-scoring A5M ace.


Variants

Ka-14: Six prototypes using various engines and design modifications
A5M1: Navy carrier-based fighter, Model 1. The first production model with an 850hp Kotobuki 2 KAI I engine.
A5M2 and A5M2a: The Model 21 with a more powerful engine.
A5M2b: The Model 22: the first production models with an NACA cowling and a 640hp Kotobuki 3 engine.
A5M3a: Prototypes utilizing a 601hp Hispano-Suiza 12 Xcrs engine.
A5M4: The Model 24; an A5M2b with a different engine, closed cockpit, and drop tank. Last production models (Model 34) utilized a Kotobuki 41 KAI engine.
A5M4-K: The two-seat trainer version of the A5M4; 103 built by Naval Ohmura Arsenal.
Ki-18: Single prototype for a land-based version for the IJAAF, based on the A5M, utilizing a 550hp Kotobuki 5 engine.
Ki-33: Two prototypes, a development of the Ki-18, using a different engine and a closed cockpit.
780 A5M1-A5M4’s were produced by Mitsubishi, 39 by Watanabe, and 161 by Naval Ohmura Arsenal(this figure does not include the A5M4-K).
1094 Total A5M versions were produced.


Specifications
Mitsubishi A5M ‘Claude’
Length: 24ft 10in
Height: 10ft 9in
Wingspan: 36ft 1in
Wing Area: 192 sq ft
Empty Weight: 2,675lb
Maximum Weight: 3,751lb
Powerplant: 710hp Nakajima Kotobuki 41 9-cylinder air-cooled radial engine
Maximum Speed: 270mph
Range: 750mi
Ceiling: 32,200ft
Armament: 2x 7.7mm Type 97 machine guns in the fuselage; 60kg of bombs

Mitsubishi A5M4 ‘Claude’
Length: 24ft 9.25in
Height: 10ft 6in
Wingspan: 36ft 1in
Wing Area: 191.6 sq ft
Empty Weight: 2,681lb
Loaded Weight: 3,759lb
Max Weight: 4,017lb
Powerplant: 1x 785hp Nakajima Kotobuki 41 9-cylinder air-cooled radial engine
Maximum Speed: 273mph @ 9,840ft
Range: 746 miles
Ceiling: 32,150ft
Armament: 2x 7.7mm Type 97 machine guns in the fuselage; 60kg of bombs

Sources:
Hunters in the Sky
www.aircraftaes.com
www.daveswarbirds.com
www.militaryfactory.com
www.wikipedia.org
www.wwiivehicles.com